How do you hook up a trolling motor circuit breaker

how do you hook up a trolling motor circuit breaker

How do you wire a 24-volt trolling motor?

When you’re wiring a 24-volt trolling motor, it’s important that you first connect to the circuit breaker (which should only be four inches from the battery. You will want to connect the positive lead of the trolling motor to the positive terminal on the circuit breaker.

Do you need a circuit breaker for a trolling motor?

A circuit breaker and an inline fuse for trolling motor both work in a similar way, and one can be an alternative to the other. Both can cut off the electric supply before an excessive amount of power ends up damaging the motor. However, there are a few key differences between them.

Do you need a fuse for a trolling motor?

For starters, you do not need to keep replacing a circuit breaker every time your trolling motor experiences an electrical fault. It can also be reset manually. A fuse, on the other hand, can provide protection only once. Replacing a fuse can also be very inconvenient.

How do trolling motor plugs work?

Trolling motor plugs function like plugs you find in your home. There are two components: the plug and the receptacle. The motor plug will “plug” into the receptacle (much like an electrical outlet in your home), thus allowing electricity to flow freely from the batteries to the motor.

How to hook up a trolling motor to a 12 volt battery?

For the 12 volt just hook up the positive and negative of the item to the same poles of ONE battery. You’ll need to make another cable, preferably with 4 or 6 gauge wire, and hook it up from the negative of battery #1 to the positive of #2. The trolling motor connections will attach on the positive of #1 and the negative of #2.

Can you wire a 24 volt motor to a battery?

Wiring a 24 volt motor is a simple task that most people can handle. After attaching your motor to your boat and placing your batteries, your next step will plan out your wiring. Making a wiring schematic is a great place to start. You can wire your trolling motor to your battery in some cases, and your project is done.

What is the difference between a 36v and 24V trolling motor?

The 24V motor is ideal for anglers who are looking for a better fishing experience at a more affordable rate than the 36V motor. The 24V trolling motor wiring schematic often shows two 12V batteries connected in a series. Connecting two 12V batteries in series provides the 24V power source required to run your motor.

What size circuit breaker do I need for a trolling motor?

These larger motors and multiple batteries are wired in a series pattern, and optimally, the circuit breaker should be wired within 4 of your battery. Both the 24v and 36v trolling motor wiring diagrams are listed below along with the recommended circuit breaker.

How does a trolling motor work?

The plug plugs into the receptacle (similar to an electrical outlet) and electrical current is able to flow from the batteries to the trolling motor. Removing the plug cuts the electrical connection and the motor can then be removed safely.

What happens when you unplug a trolling motor?

When you unplug the wire, you break the electrical connection, and you can dismount your trolling motor safely. These plugs are the simplest, as they require only two wires to work.

How do you wire a trolling motor to a receptacle?

Place the receptacle into the mounting hole and mount the receptacle using the 7/64 screws in the small 7/64 holes. Once the battery leads are wired to the battery (ies), attach the trolling motor plug to the receptacle and the system is ready to go.

What kind of plug do you use for a trolling motor?

This is the older style of plugs designed for trolling motors that could run on both 12 Volts or 24 Volts. Some plugs were designed to be used with 24-volt trolling motors so that the plug itself is used to connect two 12-volt batteries in series.

Related posts: